Get in touch

Our battery management systems can be configured to support all leading chemistries of lithium-ion batteries in various form factors (prism, cylindrical, etc.) Currently, the BMS is compatible with the following battery chemistries:

1. Lithium Cobalt Oxide(LiCoO2) — LCO

2. Lithium Manganese Oxide (LiMn2O4) — LMO

3. Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2) — NMC

4. Lithium Iron Phosphate(LiFePO4) — LFP

5. Lithium Nickel Cobalt Aluminum Oxide (LiNiCoAlO2) — NCA

6. Lithium Titanate (Li2TiO3) — LTO

Our BMS is not compatible with lead-acid or Ni-MH battery packs.

Our battery management platform can manage battery packs of all ranges from low voltage to high voltage applications. We have three variants of our smart battery management system:

1. FS-LT: Designed for battery systems from 18V to 110V

2. CT-Lite : Designed for low voltage battery systems from 32V to 80V.

3. HP-Safe: Designed for medium voltage battery systems from 32V to 150V.

All of our battery management systems are built with CAN Bus 2.0 A&B interface for charger control and system interfacing. The BMS supports all baud rates ranging from 125 kbps to 1 Mbps. Both standard and extended CAN IDs are supported by the BMS.

Our ProduXion Companion desktop software suite allows two-way communication with the battery management systems for system configuration, real-time data visualization, authentication and data transfer to our web based application, Maxwell Cloud.

Yes, all our Battery Management Systems are equipped with on-board memory storage to log every data point of the battery pack collected by the BMS, upto 20 years of historical battery data. Normally this would lead to an enormous amount of data, but we’ve developed compression algorithms tailored for battery data acquisition. The BMS records all physical parameters, events, errors relating to the performance of the battery pack. Our cloud-connected platform, Maxwell Cloud, allows engineers to access this data and gain insights into the life and performance of the battery.

Yes, we’ve specially designed and built paralleling algorithms to enable our BMS to support not just 2, 3 or 4 batteries but a total of 18 batteries connected in parallel!

Paralleling just 2 batteries together is a challenge for the BMS! This is because when two batteries of significantly different voltages are connected in parallel, a large amount of circulating current will flow between them in accordance with the difference in their voltages. This circulating current can damage the battery packs. Hence the BMS needs to ensure that batteries are allowed to be connected in parallel only when their voltages are similar.